jr
2014-08-12 21:21:17 UTC
VIRTUAL ACCESS PROGRAMMER NOW AVAILABLE FOR OBERHEIM MATRIX-6 / 6R -
$24.99!!
**** NEW PRODUCT **** !!
This software is a Virtual ACCESS synthesizer programmer for use with
the Oberheim Matrix-6/6R synthesizer. It emulates the ACCESS
hardware editor in a software environment within the APPLE LOGIC
audio/sequencer program (formerly Emagic Logic). To use this software
you MUST have a valid copy of LOGIC on your computer (see below) as well
as a MIDI interface which connects your computer via MIDI cable to your
hardware synthesizer. This software CANNOT be used as a stand alone
application under any circumstances.
Upon purchase, you will receive a ZIP archive of the editor you
purchased for Logic. UNZIP this archive and you will have a LOGIC song
document you can now open in the Logic program. Once open, you will see
the editor on your screen and you can then discover the pleasures of a
Virtual ACCESS programmer for your Oberheim Matrix-1000 synthesizer!
CAUTION! The original Matrix-6 v1.x firmware (the software inside your
unit that runs the synth) has a few bugs that are pretty serious
regarding MIDI SYSEX and these affect the programming of the synth from
any remote SYSEX editor such as this or the original ACCESS hardware
programmer. A kind fellow in Germany has fixed the worst of these bugs
and released a public v2.1.3 firmware which I INCLUDE with your purchase
of this editor (software .bin file ONLY). You will need to burn this
.bin file to a physical Eeprom for installation inside your unit.
OVERVIEW:
This editor is physically laid out to emulate the ACCESS Matrix hardware
programmer (circa 1995). If you're familiar with the ACCESS hardware
programmer then you should feel right at home here. I've adopted certain
changes for the better such as adding all the additional Matrix voice
parameters that the ACCESS lacks, including a RESET function as well as
a few other performance tools.
Important things for voice programming such as the Modulation Matrix,
Key Click, Key Mode, Portamento, and all the rest have been included
here. Every other voice parameter that the Matrix can respond to - is
present on a second programmer page. Page 1 will lay out similar to the
ACCESS programmer and Page 2 acts as an adjunct to that (please see the
included photos to understand the layout).
Due to the deep and complex nature of the Matrix synthesizer - coupled
with certain limitations in the LOGIC environment - some programming
functions will have certain minor constraints (only in the Mod Matrix).
This cannot be avoided here - but this programmer does add a ton of
functionality that the original ACCESS lacks and you can still tweak the
SYSEX objects yourself if you desire an option I have not made available.
All real time moves are recordable by the Logic sequencer for repeatable
real time changes on playback. Or as an option you can automate these
parameters with LOGIC'S hyperdraw function. You may also remotely
control these SYSEX faders and buttons via a hardware control surface if
you take the time to tailor the controls to suit your individual
hardware. This is not difficult to do and needs only be done once and
then saved for future sessions.
This programmer resides in one layer of the LOGIC environment hierarchy
- and is importable to your personal AUTOLOAD song (notes on how to do
so are also included). It is not a plug-in, but a page in the
environment which can be imported into your song documents or run
alongside your current work simultaneously as a second song.
Detailed documents are included with your purchase and cover all aspects
of usage - both remedial and advanced.
SYSTEM REQUIREMENTS:
This editor is brand new but is still compatible with many different
versions of Logic starting with Emagic MAC Version 3.x. It is tested
compatible with ALL versions of Logic through to v9 (hoping for vX
support soon - but it depends on Apple rectifying the environment issues
in X via updates). It is also compatible with Logic Express v7 - 9.
If you have a version 8 Logic you must use v 8.01 or higher which fixes
a SYSEX bug that renders v8.0 inoperable.
This editor is also compatible with the v4 - v6 PC versions of Logic
(please specify upon purchase). In all v5's - it is compatible down to
Logic SILVER. NOT compatible with Micro-Logic or any of the other
earlier neutered Emagic bundled versions.
This editor is designed to fit on one screen with a screen resolution of
1024 X 768 or larger but will also work on smaller screens. You can set
up a screenset for larger monitors that will accommodate both Page 1 and
Page 2 simultaneously if you choose.
TERMS and CONDITIONS:
Free Delivery is included with purchase (via email except for EBAY
sales). Free delivery includes all destinations worldwide. Due to the
unpredictable nature of international mail and semi-monthly only
mailings - please allow 4-6 weeks for delivery from the date of
purchase. If you prefer expedited delivery please contact me here for
other delivery options.
I only accept PAYPAL. Because this is a software only item, there are no
returns allowed. Please contact me here or via the EBAY messaging system
with any questions before the purchase.
I also offer a customizing service for your software to help integrate
it more deeply into your personal set-up should you require advanced
help. Please contact me here for more info.
Kind Regards, Virtual-PG.
***@gmail.com - Seattle, WA.
$24.99!!
**** NEW PRODUCT **** !!
This software is a Virtual ACCESS synthesizer programmer for use with
the Oberheim Matrix-6/6R synthesizer. It emulates the ACCESS
hardware editor in a software environment within the APPLE LOGIC
audio/sequencer program (formerly Emagic Logic). To use this software
you MUST have a valid copy of LOGIC on your computer (see below) as well
as a MIDI interface which connects your computer via MIDI cable to your
hardware synthesizer. This software CANNOT be used as a stand alone
application under any circumstances.
Upon purchase, you will receive a ZIP archive of the editor you
purchased for Logic. UNZIP this archive and you will have a LOGIC song
document you can now open in the Logic program. Once open, you will see
the editor on your screen and you can then discover the pleasures of a
Virtual ACCESS programmer for your Oberheim Matrix-1000 synthesizer!
CAUTION! The original Matrix-6 v1.x firmware (the software inside your
unit that runs the synth) has a few bugs that are pretty serious
regarding MIDI SYSEX and these affect the programming of the synth from
any remote SYSEX editor such as this or the original ACCESS hardware
programmer. A kind fellow in Germany has fixed the worst of these bugs
and released a public v2.1.3 firmware which I INCLUDE with your purchase
of this editor (software .bin file ONLY). You will need to burn this
.bin file to a physical Eeprom for installation inside your unit.
OVERVIEW:
This editor is physically laid out to emulate the ACCESS Matrix hardware
programmer (circa 1995). If you're familiar with the ACCESS hardware
programmer then you should feel right at home here. I've adopted certain
changes for the better such as adding all the additional Matrix voice
parameters that the ACCESS lacks, including a RESET function as well as
a few other performance tools.
Important things for voice programming such as the Modulation Matrix,
Key Click, Key Mode, Portamento, and all the rest have been included
here. Every other voice parameter that the Matrix can respond to - is
present on a second programmer page. Page 1 will lay out similar to the
ACCESS programmer and Page 2 acts as an adjunct to that (please see the
included photos to understand the layout).
Due to the deep and complex nature of the Matrix synthesizer - coupled
with certain limitations in the LOGIC environment - some programming
functions will have certain minor constraints (only in the Mod Matrix).
This cannot be avoided here - but this programmer does add a ton of
functionality that the original ACCESS lacks and you can still tweak the
SYSEX objects yourself if you desire an option I have not made available.
All real time moves are recordable by the Logic sequencer for repeatable
real time changes on playback. Or as an option you can automate these
parameters with LOGIC'S hyperdraw function. You may also remotely
control these SYSEX faders and buttons via a hardware control surface if
you take the time to tailor the controls to suit your individual
hardware. This is not difficult to do and needs only be done once and
then saved for future sessions.
This programmer resides in one layer of the LOGIC environment hierarchy
- and is importable to your personal AUTOLOAD song (notes on how to do
so are also included). It is not a plug-in, but a page in the
environment which can be imported into your song documents or run
alongside your current work simultaneously as a second song.
Detailed documents are included with your purchase and cover all aspects
of usage - both remedial and advanced.
SYSTEM REQUIREMENTS:
This editor is brand new but is still compatible with many different
versions of Logic starting with Emagic MAC Version 3.x. It is tested
compatible with ALL versions of Logic through to v9 (hoping for vX
support soon - but it depends on Apple rectifying the environment issues
in X via updates). It is also compatible with Logic Express v7 - 9.
If you have a version 8 Logic you must use v 8.01 or higher which fixes
a SYSEX bug that renders v8.0 inoperable.
This editor is also compatible with the v4 - v6 PC versions of Logic
(please specify upon purchase). In all v5's - it is compatible down to
Logic SILVER. NOT compatible with Micro-Logic or any of the other
earlier neutered Emagic bundled versions.
This editor is designed to fit on one screen with a screen resolution of
1024 X 768 or larger but will also work on smaller screens. You can set
up a screenset for larger monitors that will accommodate both Page 1 and
Page 2 simultaneously if you choose.
TERMS and CONDITIONS:
Free Delivery is included with purchase (via email except for EBAY
sales). Free delivery includes all destinations worldwide. Due to the
unpredictable nature of international mail and semi-monthly only
mailings - please allow 4-6 weeks for delivery from the date of
purchase. If you prefer expedited delivery please contact me here for
other delivery options.
I only accept PAYPAL. Because this is a software only item, there are no
returns allowed. Please contact me here or via the EBAY messaging system
with any questions before the purchase.
I also offer a customizing service for your software to help integrate
it more deeply into your personal set-up should you require advanced
help. Please contact me here for more info.
Kind Regards, Virtual-PG.
***@gmail.com - Seattle, WA.